Bonjour,
Je cherche un variateur electronique CCR 501 de la marque INCO comme indiqué sur les photos.
CCR501 Digital Dimmer Digital current control device designed with micro-controller.
GENERAL SPECIFICATIONS
•Digital current control device designed with micro-controller
•Easy to install and controll
•Accurate controll.
•Different maxsimum capacity choices 3 - 5 - 9,9 A
(Must be mentioned with order)
•Ability to store the value
TECHNICAL SPECIFICATIONS
Dimensions W72xH72xD115
Display 3 Digil 14,2mm 7 Segmented Red Led
Supply Voltage 220 VAC -t-%15, -%20,50-60 Hz,
Besleme Voltajı 220 VAC +%15, - %20, 50 - 60 Hz,
Max. 3 VA
Power Consumption 3VA
Ambience Temp. Range 0 - 50°C
Buttons Micro-switch
Data Storage EEPROM (lOyearsmin.)
Connection With socketted xlemens having cross
sectional area of 2,5 mm1
Weight 365 gr
DIMESIONS
PROGRAMMING Controling is simple
The current for the load can be adjusted with the aid of H buttons.
If any of the buttons are pressed the display will begin blinking indicating the programming mode is entered. After setting the value the device will stop blinking and store the value.
When the device is shut dovvn or in case of electrical failure the device will store the last adjusted value.
Je cherche un variateur electronique CCR 501 de la marque INCO comme indiqué sur les photos.
CCR501 Digital Dimmer Digital current control device designed with micro-controller.
GENERAL SPECIFICATIONS
•Digital current control device designed with micro-controller
•Easy to install and controll
•Accurate controll.
•Different maxsimum capacity choices 3 - 5 - 9,9 A
(Must be mentioned with order)
•Ability to store the value
TECHNICAL SPECIFICATIONS
Dimensions W72xH72xD115
Display 3 Digil 14,2mm 7 Segmented Red Led
Supply Voltage 220 VAC -t-%15, -%20,50-60 Hz,
Besleme Voltajı 220 VAC +%15, - %20, 50 - 60 Hz,
Max. 3 VA
Power Consumption 3VA
Ambience Temp. Range 0 - 50°C
Buttons Micro-switch
Data Storage EEPROM (lOyearsmin.)
Connection With socketted xlemens having cross
sectional area of 2,5 mm1
Weight 365 gr
DIMESIONS
PROGRAMMING Controling is simple
The current for the load can be adjusted with the aid of H buttons.
If any of the buttons are pressed the display will begin blinking indicating the programming mode is entered. After setting the value the device will stop blinking and store the value.
When the device is shut dovvn or in case of electrical failure the device will store the last adjusted value.
Catégories:
Matériel professionnel
Région:
TLEMCEN /
ALGERIE
Publiée le:
06-06-2021 à 07:31:51
