10/100/1000BASE-T port
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-1296 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.
Table 4-1296 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Description
Connector type
RJ45
Standards compliance
IEEE802.3, ,
Working mode
10/100/1000 Mbit/s auto-sensing
Maximum transmission distance
100 m
10GE SFP+ optical port
A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. Table 4-1297 describes the attributes of a 10GE SFP+ Ethernet optical port.
Table 4-1297 Attributes of a 10GE SFP+ port
Attribute
Description
Connector type
LC/PC
Optical port attributes
Depend on the optical module used
Standards compliance
Working mode
GE/10GE auto-sensing
Console port
The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-1298.
Table 4-1298 Attributes of a console port
Attribute
Description
Connector type
RJ45
Standards compliance
RS-232
Working mode
Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
ETH management port
You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use an Ethernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port. Table 4-1299 describes the attributes of an ETH management port.
Table 4-1299 Attributes of an ETH management port
Attribute
Description
Connector type
RJ45
Standards compliance
IEEE802.3
Working Mode
10/100 Mbit/s auto-sensing
Maximum transmission distance
100 m
A 10/100/1000BASE-T Ethernet electrical port sends and receives service data at 10/100/1000 Mbit/s, and must use an Ethernet cable. Table 4-1296 describes the attributes of a 10/100/1000BASE-T Ethernet electrical port.
Table 4-1296 Attributes of a 10/100/1000BASE-T Ethernet electrical port
Attribute
Description
Connector type
RJ45
Standards compliance
IEEE802.3, ,
Working mode
10/100/1000 Mbit/s auto-sensing
Maximum transmission distance
100 m
10GE SFP+ optical port
A 10GE SFP+ Ethernet optical port supports auto-sensing to 1000 Mbit/s. It sends and receives service data at 1000 Mbit/s or 10 Gbit/s. Table 4-1297 describes the attributes of a 10GE SFP+ Ethernet optical port.
Table 4-1297 Attributes of a 10GE SFP+ port
Attribute
Description
Connector type
LC/PC
Optical port attributes
Depend on the optical module used
Standards compliance
Working mode
GE/10GE auto-sensing
Console port
The console port is connected to a console for on-site configuration. The port must use a console cable. The console port is used when a switch is powered on for the first time. For details about the attributes of a console port, see Table 4-1298.
Table 4-1298 Attributes of a console port
Attribute
Description
Connector type
RJ45
Standards compliance
RS-232
Working mode
Duplex Universal Asynchronous Receiver/Transmitter (UART)
Baud rate
9600 bit/s, 19200 bit/s, 38400 bit/s, 57600 bit/s, or 115200 bit/s
Default value: 9600 bit/s
ETH management port
You can connect a switch to a configuration terminal or network management workstation through the ETH management port to configure the switch locally or remotely. The port must use an Ethernet cable. You can choose to download the software package through the ETH management port in the BootLoad menu. File transfer through the ETH management port is faster than transfer through the console port. Table 4-1299 describes the attributes of an ETH management port.
Table 4-1299 Attributes of an ETH management port
Attribute
Description
Connector type
RJ45
Standards compliance
IEEE802.3
Working Mode
10/100 Mbit/s auto-sensing
Maximum transmission distance
100 m
Catégories:
Réseau & Connexion
Région:
BLIDA /
ALGERIE
Publiée le:
01-07-2025 à 17:30:33
