Raspberry Pi Zero 2W Starter Kit + Official Case + Heat Sink +2 x 20 pin GPIO Header better than Raspberry Pi Zero 1.3
Introduction:
This is the Raspberry Pi Zero W starter kit , with raspberry pi zero w board , , acrylic case , heat sink , mini HDMI-compatible cable , OTG cable and GPIO header . You can choose the kit as you want .
Specification :
1. Raspberry Pi Zero : W version
2. Acrylic Case : 1). can be install the heat sink , provide better heat dissipation.
2). Acrylic material won't block the WiFi and bluetooth signal.
3). There is a layer of protective film sticker on the surface of acrylic , please tear it up gently before you use it .
4). There are transparent , Black and Blue color available. ( we will send the case color randomly if you don't leave a message in the order , thanks )
4. OTG cable : micro USB to USB , 15 cm approx
5. GPIO header : 2 row x 20 pin
6. Screwdriver : help to install or disassembly the acrylic case .
7. Power adapter :
1) : 100V - 240 V 50/60 HZ AC input
2) : 5V 2A DC output
package inclouds :
1. Raspberry Pi Zero : 2W version
2. Acrylic Case .
3. HDMi ADAPTER
4. OTG cable : micro USB to USB , 15 cm approx
5. GPIO header : 2 row x 20 pin
6. Screwdriver : help to install or disassembly the acrylic case .
7. Power adapter :
Introduction:
This is the Raspberry Pi Zero W starter kit , with raspberry pi zero w board , , acrylic case , heat sink , mini HDMI-compatible cable , OTG cable and GPIO header . You can choose the kit as you want .
Specification :
1. Raspberry Pi Zero : W version
2. Acrylic Case : 1). can be install the heat sink , provide better heat dissipation.
2). Acrylic material won't block the WiFi and bluetooth signal.
3). There is a layer of protective film sticker on the surface of acrylic , please tear it up gently before you use it .
4). There are transparent , Black and Blue color available. ( we will send the case color randomly if you don't leave a message in the order , thanks )
4. OTG cable : micro USB to USB , 15 cm approx
5. GPIO header : 2 row x 20 pin
6. Screwdriver : help to install or disassembly the acrylic case .
7. Power adapter :
1) : 100V - 240 V 50/60 HZ AC input
2) : 5V 2A DC output
package inclouds :
1. Raspberry Pi Zero : 2W version
2. Acrylic Case .
3. HDMi ADAPTER
4. OTG cable : micro USB to USB , 15 cm approx
5. GPIO header : 2 row x 20 pin
6. Screwdriver : help to install or disassembly the acrylic case .
7. Power adapter :
Etat:
Neuf jamais utilisé
Catégories:
Electroménager & Électronique
Région:
ALGER /
ALGERIE
Publiée le:
02-09-2025 à 10:38:00
