XGecu T48 Newest Programmer Support 34000+IC for EEPROM/MCU/SPI/Nor/NAND Flash/EMMC/IC TESTER ...2026
XGecu T48 Programmer Instead of TL866CS TL866II runs under Windows XP,Vista Win7 WIN8 WIN10 WIN11
XGecu T48 Programmer Product Description:
T48 (TL866-3G) programmer is the improvement of TL866II Plus programmer.
Support high-capacity NAND EMMC up to 256GB and programming speed is much higher.
Suppport high-voltage chips, VPP Maximum up to 25V.
Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small (size is almost the same as TL866II), code-runs much faster.
T48 offers significantly improved performance and excellent value for money.
XGecu T48 Programmer Support System:
Windows XP、Vista Win7 WIN8 WIN10 WIN11
T48 (TL866-3G) English manual download link: (similar as TL866II/T56)
XGecu T48 Programmer Support Multi-language:
English, Chinese, Russian, Polish, German, Spanish, Portuguese, Turkish, Czech, Italian
EMMC Function Inrtoductions:
Read and write speeds up to 17M Bytes/s, MAX capacity : 256GB
Support ISP in-circuit programming
1b MODE speed: 4.7MB/s 4b MODE: 17MB/s
Analysis EMMC fuctions
Show emec manufacturing and device life time information
Show memory usage of 8 partitions
Each partitions shows whether it is write protected
Shows whether the entire chip is temporarily or permanently write protected
Show whether the chip is password protected
Show whether the emmc use a 32-bit security authentication code to write to the RPMB.
Show other important parameters Of ECSD/CSD/CID
Read/write functionns (all functions can be completed with one-key)
Read CID CSD ECSD
CIear full-chip temporary write protection before programming
Clear temporary write protection groups before programming
Erase chip before programming
Blank check the chip before programming
Programming 32-bit authentication key
password verification
Partition Config
Read and Programming to B00T1
Read and Programming to BOOT2
Read and Programming to RPMB
Read and Programming tO GPP1/GPP2/GPP3/GPP4
Read and Programming user data(User Area)
Setting temporary write protection groups
Setting permanent write protection groups
Setting password (or reset password)
Programming ECSD
Programming CSD
Automatically verify the above operations after Programming
NAND function introduction:
Speeds up to 3.2M Bytes /s of S_NAND, 6MB/s of P_NAND, MAX capacity:256G
Support ISP in-circuit programming for SPI NAND
Function:
Support OTP programming
Support internal ECC on/off function
Support UID (unique signature) reading
Support multiple partition and multiple file operations
Support NAND parameter custom function, (new chips can be added by custom parameters)
The programming clock speed and VCC/VIO voltage is adjustable.
Support 1.8V and 16bits device.
Support ISP programming of SPI NAND (MAX 3.2MB/s).
Package type: DIP8/SOIC8/SOIC16/WSON8/BGA24/BGA63/TSOP48
XGecu T48 Programmer Support
XGecu T48 Programmer High Speed
XGecu T48 Programmer Speed Compare
XGecu T48 Programmer Instead of TL866CS TL866II runs under Windows XP,Vista Win7 WIN8 WIN10 WIN11
XGecu T48 Programmer Product Description:
T48 (TL866-3G) programmer is the improvement of TL866II Plus programmer.
Support high-capacity NAND EMMC up to 256GB and programming speed is much higher.
Suppport high-voltage chips, VPP Maximum up to 25V.
Production of high-density SMD technology, a unified user interface, easy to use, fully functional, reliable program running of application software, ultra-small (size is almost the same as TL866II), code-runs much faster.
T48 offers significantly improved performance and excellent value for money.
XGecu T48 Programmer Support System:
Windows XP、Vista Win7 WIN8 WIN10 WIN11
T48 (TL866-3G) English manual download link: (similar as TL866II/T56)
XGecu T48 Programmer Support Multi-language:
English, Chinese, Russian, Polish, German, Spanish, Portuguese, Turkish, Czech, Italian
EMMC Function Inrtoductions:
Read and write speeds up to 17M Bytes/s, MAX capacity : 256GB
Support ISP in-circuit programming
1b MODE speed: 4.7MB/s 4b MODE: 17MB/s
Analysis EMMC fuctions
Show emec manufacturing and device life time information
Show memory usage of 8 partitions
Each partitions shows whether it is write protected
Shows whether the entire chip is temporarily or permanently write protected
Show whether the chip is password protected
Show whether the emmc use a 32-bit security authentication code to write to the RPMB.
Show other important parameters Of ECSD/CSD/CID
Read/write functionns (all functions can be completed with one-key)
Read CID CSD ECSD
CIear full-chip temporary write protection before programming
Clear temporary write protection groups before programming
Erase chip before programming
Blank check the chip before programming
Programming 32-bit authentication key
password verification
Partition Config
Read and Programming to B00T1
Read and Programming to BOOT2
Read and Programming to RPMB
Read and Programming tO GPP1/GPP2/GPP3/GPP4
Read and Programming user data(User Area)
Setting temporary write protection groups
Setting permanent write protection groups
Setting password (or reset password)
Programming ECSD
Programming CSD
Automatically verify the above operations after Programming
NAND function introduction:
Speeds up to 3.2M Bytes /s of S_NAND, 6MB/s of P_NAND, MAX capacity:256G
Support ISP in-circuit programming for SPI NAND
Function:
Support OTP programming
Support internal ECC on/off function
Support UID (unique signature) reading
Support multiple partition and multiple file operations
Support NAND parameter custom function, (new chips can be added by custom parameters)
The programming clock speed and VCC/VIO voltage is adjustable.
Support 1.8V and 16bits device.
Support ISP programming of SPI NAND (MAX 3.2MB/s).
Package type: DIP8/SOIC8/SOIC16/WSON8/BGA24/BGA63/TSOP48
XGecu T48 Programmer Support
XGecu T48 Programmer High Speed
XGecu T48 Programmer Speed Compare
Catégories:
Matériel professionnel
Région:
DJELFA /
ALGERIE
Publiée le:
27-03-2026 à 17:11:54
Ces annonces peuvent vous intéresser
ouedkniss.com
