HD3 Display
Small Form-factor Display with 1.8-inch TFT LCD
• High-resolution 1.8-inch TFT LCD display that can detect
1 μm or smaller scratches and dirt particles
• Ruggedized enclosure for use in any environment
• GripSwitch™ mode activates the display when held in-hand
and deactivates when released, extending battery life
• Built-in rechargeable NiMH battery pack
• Over 3-hour run time on continuous-ON mode and
extended run time in GripSwitch mode
• Low-battery warning LED (illuminates when battery life is
< 30 minutes)
• AC adapter (100–240 VAC/12 VDC) charges NiMH battery
and also acts as alternate power supply
View clear detailed fiber end face
images on 1.8-in video display
• Use with JDSU probe microscope
to inspect both bulkhead (female)
and patch cord (male) sides of fiber
interconnect
• Promote proper fiber handling
workflow and practice
HD3 Display Specifications
Dimensions 10 x 7.2 x 4.3 cm
(3.9 x 2.8 x 1.7 in)
Weight 230 g (8.1 oz) with probe
Video display 1.8-in (45.7 mm) TFT LCD
Connector 4-pin Hirose™ for FBP probes;
hardwired to FBP or FBE probes
Power source Built-in rechargeable NiMH
(nickel metal hydride),
800mAH battery or AC adapter
(100–200VAC/12VDC)
Power modes ON (continuous on)
GripSwitch (power saving mode)
OFF/CHARGE
Run time ~3 hours (continuous on)
Extended run time with use of
GripSwitch (power saving mode)
Small Form-factor Display with 1.8-inch TFT LCD
• High-resolution 1.8-inch TFT LCD display that can detect
1 μm or smaller scratches and dirt particles
• Ruggedized enclosure for use in any environment
• GripSwitch™ mode activates the display when held in-hand
and deactivates when released, extending battery life
• Built-in rechargeable NiMH battery pack
• Over 3-hour run time on continuous-ON mode and
extended run time in GripSwitch mode
• Low-battery warning LED (illuminates when battery life is
< 30 minutes)
• AC adapter (100–240 VAC/12 VDC) charges NiMH battery
and also acts as alternate power supply
View clear detailed fiber end face
images on 1.8-in video display
• Use with JDSU probe microscope
to inspect both bulkhead (female)
and patch cord (male) sides of fiber
interconnect
• Promote proper fiber handling
workflow and practice
HD3 Display Specifications
Dimensions 10 x 7.2 x 4.3 cm
(3.9 x 2.8 x 1.7 in)
Weight 230 g (8.1 oz) with probe
Video display 1.8-in (45.7 mm) TFT LCD
Connector 4-pin Hirose™ for FBP probes;
hardwired to FBP or FBE probes
Power source Built-in rechargeable NiMH
(nickel metal hydride),
800mAH battery or AC adapter
(100–200VAC/12VDC)
Power modes ON (continuous on)
GripSwitch (power saving mode)
OFF/CHARGE
Run time ~3 hours (continuous on)
Extended run time with use of
GripSwitch (power saving mode)
Catégories:
Matériel professionnel
Région:
ALGER /
ALGERIE
Publiée le:
29-03-2026 à 14:03:45
Ces annonces peuvent vous intéresser
ouedkniss.com
