Pince pour collier soufflet de cardon avec cutter JEAE0423
Description
ITEM NO: JEAE0423
Use to install and tighten the band-it and strap style clamp on CV joint boots, power steering rack and
Pinion steering gear boots
Bands are installed into the tool and tightened by turning the tool handle
Use a 1/2" socket/wrench or by hand to wind the band until sufficient tension is applied
When boot clamp has been tightened to specs, the built in cutter cuts the band by flipping tool lever (at the front of the tool) forward
Easy to remove the tool by sliding sideways after the band is tightened
Description
ITEM NO: JEAE0423
Use to install and tighten the band-it and strap style clamp on CV joint boots, power steering rack and
Pinion steering gear boots
Bands are installed into the tool and tightened by turning the tool handle
Use a 1/2" socket/wrench or by hand to wind the band until sufficient tension is applied
When boot clamp has been tightened to specs, the built in cutter cuts the band by flipping tool lever (at the front of the tool) forward
Easy to remove the tool by sliding sideways after the band is tightened
Catégories:
Matériaux & Équipement
Région:
ALGER /
ALGERIE
Publiée le:
10-12-2025 à 08:24:53
Ces annonces peuvent vous intéresser
ouedkniss.com
